favorite
favorite
hide
unhide
flag

Posted

print

DOD 431 Series 2 Graphic Equalizer - Tested / Serviced Working - $40 (Westlake)

DOD 431 Series 2 Graphic Equalizer - Tested / Serviced Working 1 thumbnailDOD 431 Series 2 Graphic Equalizer - Tested / Serviced Working 2 thumbnailDOD 431 Series 2 Graphic Equalizer - Tested / Serviced Working 3 thumbnailDOD 431 Series 2 Graphic Equalizer - Tested / Serviced Working 4 thumbnailDOD 431 Series 2 Graphic Equalizer - Tested / Serviced Working 5 thumbnail
29313 Clemens Rd - Suite 2C near Mildred

google map

condition: good
make / manufacturer: DOD
model name / number: 431 Series II
size / dimensions: 1.75”x6”x19”

more ads by this user

DOD 431 Series 2 Graphic Equalizer - Recently Tested and Serviced - Slider pots cleaned and lubricated. Pots Cleaned. Fully Tested. This is a single channel EQ, that can be used on a monitor channel, in a guitar rig, or on one side of a main system. DOD are known for quality made in USA craftsmanship. Unit is is good overall condition and has plenty of use left! It has some scratches from mounting and use.

Cash Sale No Holds Call or text.

The DOD 431 SERIES II is a well known single rack space, 31 band 1/3 octave graphic equalizer. Its fully shielded internal transformer provides extremely quiet operation. and like all of the SE line of equalizers, it has constant Q filters.

Features
- Dual 31-band equalizer
- Constant Q
- Low cut filter at 50Hz with a 12dB/Octave slope
- Bal 1/4" input and impedance balanced 1/4" output
- RCA Phone jacks included on back
- ISO 1/3 octave frequency centers

SPECIFICATIONS
- Frequency Response: 20Hz to 20kHz, =0/-0.5 dB
- Low Cut Filter: 12 dB/ octave roll-off, 3 dB down at 50 Hz switchable in or out.
- Frequency Center Tolerance: 5%
- Control Range: 12 dB cut/ boost
- Recommended Operating Level: -10 dBV to +4 dBu
- Input Impedance: 40k Ohms balanced, 20k Ohms unbalanced
- Maximum Output Level: +21 dBu (balanced or unbalanced)
- Input Level Control: +/-12 dB
- Input Level Indicator: LED bar graph; -10,0,+10, and +17
- Harmonic Distortion: .006% @ 1 kHz
- S/N Ratio: Greater than 90 dB (ref. 0.0775Vrms)
- Electronic Switching: In/Out and Filter switches (FET type)
- Power Requirements: 100/120/220-230/240 VAC, 50/60 Hz @ 18 watts
- 1.75”x6”x19”

post id: 7714570671

posted:

updated:

best of [?]

loading
reading
writing
saving
searching